Design of Injection Molded Plastic Parts

79,99 € (Print)

inkl. MwSt., ggf. zzgl. Versandkosten

sofort lieferbar
79,99 € (PDF)

sofort lieferbar

Beschreibung
Design of Injection Molded Plastic Parts
This book creates a new perspective on the design of plastic parts. In many books there is a strong focus on the material, the material properties, and the calculation or dimensioning. What is often not taken into account is that very many plastic components only have to withstand low loads; in very many applications, the focus is on the actual design. This requires a good understanding of the injection molds that must be built to produce the plastic components. Depending on the design of the injection molded component, these molds become more complex and more prone to failure during production.
The complex process of manufacturing a plastic part becomes holistically understandable as a link is created between the molder, the mold maker, and the part designer. The focus is on injection molds and therefore on thermoplastics.
Everything that is necessary for the design and manufacture of an injection molded component is presented in a simple, extremely practical manner and limited to the essentials. Many descriptive pictures as well as examples based on the demonstration component "Polyman" facilitate the understanding enormously.
Design of Injection Molded Plastic Parts
This book creates a new perspective on the design of plastic parts. In many books there is a strong focus on the material, the material properties, and the calculation or dimensioning. What is often not taken into account is that very many plastic components only have to withstand low loads; in very many applications, the focus is on the actual design. This requires a good understanding of the injection molds that must be built to produce the plastic components. Depending on the design of the injection molded component, these molds become more complex and more prone to failure during production.
The complex process of manufacturing a plastic part becomes holistically understandable as a link is created between the molder, the mold maker, and the part designer. The focus is on injection molds and therefore on thermoplastics.
Everything that is necessary for the design and manufacture of an injection molded component is presented in a simple, extremely practical manner and limited to the essentials. Many descriptive pictures as well as examples based on the demonstration component "Polyman" facilitate the understanding enormously.
Kundenbewertungen für "Design of Injection Molded Plastic Parts"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Autor(en)

Christoph Jaroschek is Professor in Mechanical Engineering at the Bielefeld University of Applied Sciences, Germany. Previously, he was for 10 years Head of Application Technology and Process Development at a well-known manufacturer of injection molding machines.

Christoph Jaroschek is Professor in Mechanical Engineering at the Bielefeld University of Applied Sciences, Germany. Previously, he was for 10 years Head of Application Technology and Process Development at a well-known manufacturer of injection molding machines.

Weitere Titel des Autors Auch oft angesehen
Newsletter

Nichts mehr verpassen!

Aktuelles & Angebote
im monatlichen IT-Newsletter.

Hanser Youtube Channel

Autoreninterviews,
Messebesuche, Buchvorstellungen,
Events
und vieles mehr.

Hanser Podcast

Wissen für die Ohren

Themen aus Wirtschaft,
Management und Technik